Instrument
INS-08
Revision
r0.3 · pre-alpha
Status
In development
Target release
Q3 2026
Adhesive Selection Matrix
Selects appropriate adhesive class against product, substrate condition, moisture load and service temperature.
Removes adhesive substitution risk at site and aligns warranty position with the correct bonding chemistry.
Preview interface · not yet operational
beta://library/adhesive-matrix
INS-08 · r0.3 · pre-alpha
Input parameters
Product
Engineered timber 15mmLocked
Substrate
Power-floated concreteLocked
Substrate moisture
% CM
2.8Locked
Service temperature
°C
12 – 34Locked
In-slab heating
NoneLocked
Compatibility matrix
| Adhesive | Timber | Hybrid | Damp slab | Radiant heat |
|---|---|---|---|---|
| MS Polymer | ● | ● | ○ | ● |
| 1K PU | ● | ○ | ● | ● |
| 2K PU | ● | ● | ● | ○ |
| Dispersion | ○ | ○ | ○ | ● |
● approved ○ not approved
Output register
01
Adhesive family (MS / PU / dispersion)
Awaiting · release
02
Trowel notch & spread rate
Awaiting · release
03
Open time envelope
Awaiting · release
04
Warranty alignment note
Awaiting · release
Session · read-only · logged
Bonding systems
Planned capability
- 01Bidirectional filter (start from adhesive, resolve compatible products).
- 02Environmental disclosure per adhesive (VOC / emission class).
- 03Coordinated primer & moisture barrier selection.